15216781845
產品系統PRODUCTS SYSTEM
在發展中求生存，不斷完善，以良好信譽和科學的管理促進企業迅速發展
首頁-產品中心-其它耗材與試劑 > WHATMAN FTA卡打孔器孔頭直徑1.2mm WB100074
產品簡介：WHATMAN FTA卡打孔器孔頭直徑1.2mm WB100074，GE Healthcare＇s Uni-Core product range provides easy ａnd cost effective manual punching for Whatman FTA, 903 ａnd DMPK cards at the quality standards you expect.
更新時間：2023-04-11瀏覽次數：1755產品分類
PRODUCT CATEGORY相關文章
ARTICLES詳細介紹
WHATMAN FTA卡打孔器孔頭直徑1.2mm WB100074
GE Healthcare's Uni-Core product range provides easy ａnd cost effective manual punching for Whatman FTA, 903 ａnd DMPK cards at the quality standards you expect.
Designed for use with Whatman FTA Cards, FTA Elute Cards, ａnd EasiCollect device.
Multiple diameters ranging from 1.0MM to 6.0MM in plastic housing for sample punching versatility.
Stainless steel cutting edges enable manual coring, retrieval, ａnd controlled ejection of the FTA punch.
Disposable to minimize contamination ａnd carryover between samples when a cleaning procedure is followed.
Our range of manual punchers focus on the products commonly needed for laboratory samples preparation workflows.
Unicore punchers have a proprietary GE Healthcare design with a sharp, stainless steel cutting edge. The use of our recommended punch procedure minimizes the risk of sample carryover between cards ａnd our companion cutting mat allows for clean sample cuts ａnd extends the life of the cutting tip.
WHATMAN FTA卡打孔器孔頭直徑1.2mm WB100074訂購信息：
| WB100006 | 22 | 520 | p_MICROPUNCH TIP 1.2MM 1/PK (28421838) |
| WB100042 | 22 | 520 | p_MICROPUNCH TIP 3.0MM 1/PK (28421860) |
| WB100007 | 22 | 520 | p_MICROPUNCH 2.0MM 1/PK (28421839) |
| WB100005 | 22 | 520 | p_MICROPUNCH 1.2MM 1/PK (28421837) |
| WB100008 | 22 | 520 | p_MICROPUNCH TIP 2.0MM 1/PK (28421840) |
| WB100014 | 22 | 520 | p_BLOODSTAIN CARD 100/PK (28421842) |
| WB100020 | 22 | 520 | p_CUTTING MAT 1/PK (28421844) |
| WB100024 | 22 | 520 | p_CLONESAVER RESEAL POUCH 50/PK (28421845) |
| WB100025 | 22 | 520 | p_MICROPUNCH PLUNGER 1.2MM 1/PK (28421846) |
| WB100026 | 22 | 520 | p_MICROPUNCH PLUNGER 2.0MM 1/PK (28421847) |
| WB100028 | 22 | 520 | p_UNICORE PUNCH 1.2MM 4/PK (28421848) |
| WB100029 | 22 | 520 | p_UNICORE PUNCH 2.0MM 4/PK (28421849) |
| WB100030 | 22 | 520 | p_FTA GENECARD TRAY 20/PK (28421850) |
| WB100034 | 22 | 520 | p_SPOT HOLDER 1/PK (28421852) |
| WB100035 | 22 | 520 | p_OMNISWAB 100/PK (28421853) |
| WB100036 | 22 | 520 | p_POUCH 3.75INX3IN 100/PK (28421854) |
| WB100037 | 22 | 520 | p_POUCH 4.37INX6.5IN 100/PK (28421855) |
| WB100038 | 22 | 520 | p_MICROPUNCH 3.0MM 1/PK (28421856) |
| WB100039 | 22 | 520 | p_UNICORE PUNCH 3.0MM 4/PK (28421857) |
| WB100040 | 22 | 520 | p_UNICORE PUNCH 6.0MM 4/PK (28421858) |
| WB100041 | 22 | 520 | p_MICROPUNCH PLUNGER 3.0MM 1/PK (28421859) |
| WB100003 | 22 | 520 | p_DESICCANT 1000/PK (28421835) |
| WB100060 | 22 | 520 | p_HARRIS MICROPUNCH 1.00MM PLAST (29002370) |
| WB100065 | 22 | 520 | p_HARRIS MICROPUNCH 1.00MM ALUM (29002489) |
| WB100064 | 22 | 520 | p_HARRIS MICROPUNCH 0.50MM ALUM (29002487) |
| WB100067 | 22 | 520 | p_HARRIS MICROPUNCH TIP 1.00MM (29002493) |
| WB100062 | 22 | 520 | p_HARRIS MICROPUNCH 2.00MM PLAST (29002391) |
| WB100066 | 22 | 520 | p_MICROPUNCH TIP 0.50MM (29002491) |
| WB100061 | 22 | 520 | p_HARRIS MICROPUNCH 1.20MM PLAST (29002378) |
| WB100063 | 22 | 520 | p_HARRIS MICROPUNCH 3.00MM PLAST (29002412) |
| WB100059 | 22 | 520 | p_HARRIS MICROPUNCH 0.50MM PLAST (29002362) |
| WB100068 | 22 | 520 | p_HARRIS PLUNGER FOR 0.50MM TIP (29002495) |
| WB100069 | 22 | 520 | p_HARRIS PLUNGER FOR 1.00MM TIP (29002497) |
| WB100071 | 22 | 520 | p_HARRIS 25XUNI-CORE 0.50MM (29002511) |
| WB100075 | 22 | 520 | p_25X UNI-CORE 1.50MM (29002519) |
| WB100085 | 22 | 520 | p_HARRIS 25XUNI-CORE 10.00MM (29002539) |
| WB100084 | 22 | 520 | p_25XUNI-CORE 8.00MM (29002537) |
| WB100086 | 22 | 520 | p_HARRIS 25XUNI-CORE 12.00MM (29002541) |
| WB100070 | 22 | 520 | p_HARRIS 25XUNI-CORE 0.35MM (29002504) |
| WB100074 | 22 | 520 | p_25XUNI-CORE 1.20MM (29002517) |
| WB100081 | 22 | 520 | p_25XUNI-CORE 5.00MM (29002531) |
| WB100082 | 22 | 520 | p_HARRIS 25XUNI-CORE 6.00MM (29002533) |
| WB100073 | 22 | 520 | p_25X UNI-CORE 1.00MM (29002515) |
| WB100077 | 22 | 520 | p_HARRIS 25XUNI-CORE 2.50MM (29002523) |
| WB100078 | 22 | 520 | p_HARRIS 25XUNI-CORE 3.00MM (29002525) |
| WB100079 | 22 | 520 | p_HARRIS 25XUNI-CORE 3.50MM (29002527) |
| WB100080 | 22 | 520 | p_HARRIS 25XUNI-CORE 4.00MM (29002529) |
| WB100083 | 22 | 520 | p_25XUNI-CORE 7.00MM (29002535) |
| WB100072 | 22 | 520 | p_25X UNI-CORE 0.75MM (29002513) |
| WB100076 | 22 | 520 | p_25X UNI-CORE 2.00MM (29002521) |
| WB100032 | 22 | 520 | p_FOAM APPLICATOR 100/PK (28421851) |
產品咨詢
15216781845
genshengtech@163.com
上海市奉賢區南橋鎮南橋路377號1幢
關注我們
關于我們
產品導航
版權信息